PRODUCTS

Density: 7.8g/cm³
Diameter: Ø1-500mm
Tolearance: h8-h11
Surface: black,pickling,bright,polish,rough turn,ground polish
Equivalent designations:
Grade AISI 430, UNS S43000, DIN 1.4016
Standard: ASTM A276,JIS G4303,EN 10088-3

Inquiry
Product introduction
430 is a ferritic stainless steel, which has good corrosion resistance. Its thermal conductivity is better than that of austenite. Its thermal expansion coefficient is smaller than that of austenite, and its thermal fatigue resistance is better than that of austenite. 430 stainless steel is used for building decoration, fuel burner parts, household appliances, household appliances, etc.

430 stainless steel bars include:
430 Stainless steel bright bar
430 Stainless steel cold drawn bar
430 Stainless steel hot rolled bar
430 Stainless steel forged bar
430 Stainless steel grinding rod
430 Stainless steel hexagonal rod
430 stainless steel angle bar
430 Stainless steel square bar
430 Stainless steel flat bar
430 Stainless steel angle bar
430 Stainless steel channel bar

430 stainless steel bar chemical composition:
Grade UNS Chemical Component %
C Mn P S Si Cr
430 S43000 Max 0.12 Max 1.00 Max 0.04 Max 0.03 Max 1.00 16.0-18.0
430 stainless steel bar mechanical properties:
TYPE PROCESSING METHOD DIAMETER TENSILE STRENGTH (Mpa) YIELD STRENGTH (Mpa) ELONGATION (2INCH) % REDUCTION OF AREA %
430 Hot working or cold working All ≥415 ≥207 ≥20 ≥45
HS Code: 7222400000
Standard: ASTM, JIS, GB, EN, GOST
Length: 1-12m
Tolerance: H8,H9,H10,H11 or as required
Production method cold drawn,cold rolled,hot rolled,forged
430 stainless steel characteristics:
430 stainless steel has oxidation resistance and corrosion resistance, but it has intergranular corrosion tendency.
430 stainless steel wires and bars are widely used in axles.
Because of its safety and non-toxicity, it is widely used in tableware.

Packing and equipments:

Send your message to us :

Our Products